Who makes good tubes?

Tube-specific discussions

Moderators: colossal, zaphod_phil, CurtissRobin

Post Reply
User avatar
BBQLS1
Old timer, Never stops talking
Old timer, Never stops talking
Posts: 2104
Joined: Thu 11/17/05 2:00 am
Location: Red Stick Louisiana!

Who makes good tubes?

Post by BBQLS1 »

I just bought a set of JJ's for my Boogie (Just bought it, tubes were crap, so I bought the JJ's). After reading a few posts, I'm hearing that some people have problems with them.

So far my JJ's seem fine, but I'm going to need some new tubes for my DSL401, and was wondering what I should look for.

What do ya'll suggest?
0 x

KT77
Occasional poster
Occasional poster
Posts: 353
Joined: Sun 09/04/05 2:00 am

Post by KT77 »

once you go bla.....uh...NOS..you never go back :wink:

sarge has them at competitive prices to new stuff (iow..you get what you pay for)
0 x

nigelb
Occasional poster
Occasional poster
Posts: 405
Joined: Thu 08/07/03 2:00 am
Location: Cardiff, South Wales
Contact:

Post by nigelb »

Some seem to have a few problems, but as far as I can see most don't. I have bought, tested and used hundreds of various JJ tubes but so far have only had one failure (el34). Heaps better than things used to be in the 70's and 80's when 20% of new tubes would finish up in the bin!! Yes even Mullards.

Problem is you only hear about the odd duff one here - not the thousands of good ones. JJs are my preferred new build tubes.
0 x

rjgtr
Builder, Admin
Builder, Admin
Posts: 6668
Joined: Wed 11/24/04 2:00 am
Location: Jax, FL
Contact:

Post by rjgtr »

NOS are great sounding if they are right tubes. Not all NOS is great. Most new production is pretty good these days. I tend to like JJs in general for new production. They sound good and are reliable.
0 x

User avatar
spikeRI
Newbie
Newbie
Posts: 33
Joined: Wed 03/23/05 2:00 am
Location: Houston, Tejas

Post by spikeRI »

ain't that the truth about not all NOS being worth it...........some sound average to best, but when you find one thats special............well. you will know....
0 x

Post Reply