18Watt.com

Posted: **Wed 04/05/06 7:41 pm**

V1
PIN1: 138
PIN3: 0.8
PIN6: 142
PIN8: 1.3

V2
PIN1: 140
PIN3: 1.3
PIN6: 232
PIN7: 140
PIN8: 140

v3
PIN1: 240
PIN2: 203
PIN3: 203
PIN6: 225
PIN6: 238
PIN7:210
PIN8: 225
V4,5,6,7:
PIN3: 10.55
PIN7: 323
PIN9: 285

Posted: **Wed 04/05/06 8:00 pm**

Check the connections from the Tail of the PI (56K) to the feedback switch if you have one. It could be that you aren't gettin a ground on the PI.

Posted: **Wed 04/05/06 8:12 pm**

OMFG!!!

You nailed it!

All Voltages are 100% under control.

I seem to be running cool on ALL volages... Is that because of the 1k5 resistor at the cap can?

Or is it because I am using Electro Harmonics that eat up more current...??

Posted: **Wed 04/05/06 8:30 pm**

That one was pretty easy......glad you found it!

The voltages on every amp are different. They should be in a range but with different trannys,caps, resistors and tubes there is always tolerances that come into play. As long as they are close I wouldn't worry about it. I would rather be running a little cool than have the problem of how to get the voltages down.

18Watt.com

HELP! VOLTAGES ARE WEIRD!

HELP! VOLTAGES ARE WEIRD!