Inside traynor peek pic
Moderators: colossal, zaphod_phil, CurtissRobin, Daviedawg, Graydon
-
LPC
Inside traynor peek pic
I opened it up to take a peek...I snapped this for any other Traynor freaks - pretty cool
If my 18 sounds anywhere near as good as this thing when I finally get it done I ll be thrilled.
If my 18 sounds anywhere near as good as this thing when I finally get it done I ll be thrilled.
0 x
- Benboom
- Occasional poster

- Posts: 106
- Joined: Sun 10/12/03 2:00 am
- Location: Portland, Oregon
- Contact:
- Graydon
- Admin, Charter Member

- Posts: 1632
- Joined: Fri 01/31/03 2:00 am
- Location: USA
- Contact:

-
AppleScruff
The idea is to get the heater wires away from the high impedance of the other pins. They don't care if the heater wires are above or below them just so you don't get any coupling between them. If you run them tight up to the chassis you can have problems as well.Benboom wrote:Interesting to see that they wired the heaters last - all the heater wires are running above the audio circuits.
0 x
- Benboom
- Occasional poster

- Posts: 106
- Joined: Sun 10/12/03 2:00 am
- Location: Portland, Oregon
- Contact:
